Applications
Experience the Nanobubbles Advantage - Revolutionizing Industry with Precision Innovation
At TMC Fluid Systems, we harness the cutting-edge science of nanobubbles to unlock measurable impact across diverse industries. Our advanced nanobubble solutions are engineered to optimize performance, reduce environmental footprint, and enable sustainable growth. Whether in water treatment, agriculture, aquaculture, or industrial processing, TMC Nanobubbles delivers the breakthrough technology that turns complex challenges into competitive advantages.
Nanobubble Applications: Where the Technology Earns Its Place
Most water problems come down to the same bottleneck: getting a gas into water, keeping it there long enough to do useful work, and doing it without spending more energy, chemicals, or floor space than the result justifies. Nanobubble technology attacks that bottleneck directly. It does not change the chemistry of treatment. It changes how thoroughly, and for how long, a gas can stay in contact with the water it is meant to treat.
This page is written for the three people who usually have to agree before a system is bought. The operations manager needs to know what will change on a normal shift, and what will break first. The specifying engineer needs numbers that can be checked, not slogans that cannot. The decision maker needs to know where the return comes from, what it depends on, and where the honest limits are.
A nanobubble is a gas bubble smaller than one micrometre across, far smaller than the fine bubbles from a conventional diffuser. Instead of rising quickly to the surface and bursting, it stays suspended for hours, sometimes much longer, carried by the random motion of water molecules and held apart from its neighbours by its surface charge. That gives an enormous surface area for a very small volume of gas, and a contact time measured in hours rather than seconds. More of the gas therefore has a chance to dissolve, to oxidise, or to attach to a particle, instead of escaping at the surface unused.
How to Judge a Nanobubble Claim
Nanobubble performance is easy to overstate when a test is run in clean water, at a comfortable temperature, with no competing load. Real water is messier. Surfactants, oils, suspended solids, and temperature all reduce gas transfer, and a system that looks impressive in a tank of tap water may perform very differently in a plant influent stream.
Four questions separate a serious proposal from a vague one. Was oxygen transfer measured in process water or only in clean water? What was the baseline for dissolved oxygen, energy use, chemical dose, and effluent quality, recorded before the trial under comparable load? What changed besides the nanobubble unit? And what does the system cost to run for a full year, including gas supply, pump energy, consumables, cleaning, and operator time? A pilot that only reports the purchase price has not answered the question a decision maker actually asked.
Those questions explain why the most credible projects are usually hybrids, not wholesale replacements. A sidestream nanobubble unit is generally sized to trim, polish, or target a specific problem: holding dissolved oxygen steady through a load peak, recovering transfer efficiency where surfactants or fats, oils, and grease are suppressing it, or adding capacity inside an existing footprint where there is no room for another basin. It is not, as a rule, a like-for-like replacement for the plant-wide aeration system that carries the bulk oxygen demand. Any proposal that claims otherwise should show the full oxygen balance, in kilograms of oxygen per hour, against the plant's actual demand.
Municipal and Industrial Wastewater Treatment
Aeration is usually the largest single electricity cost in a treatment plant, often half or more of its total power use, so even a modest improvement in oxygen transfer efficiency matters. But the biological stage is also the least forgiving place to experiment, because a permit violation is not an academic result.
In activated sludge basins, the value of nanobubble oxygenation is usually steadiness rather than raw power. Nitrifying bacteria, which convert ammonia to nitrate, grow slowly and need about 4.6 grams of oxygen for every gram of ammonia-nitrogen. They are often the first biology to suffer when aeration falls short, and ammonia excursions are among the most common permit problems. A sidestream unit that holds dissolved oxygen steady through daily peaks or a shock load can therefore protect the process that is hardest to recover once it has been upset.
The same logic applies to moving bed biofilm reactors and membrane bioreactors. In an MBBR, bacteria grow as a biofilm on plastic carriers, and performance is often limited by how fast oxygen can diffuse into that film. In an MBR, membranes produce very high-quality effluent, but fouling by biofilm and extracellular polymeric substances gradually raises energy use and cleaning costs. Nanobubble oxygenation can help in both cases, and ozone nanobubbles are also used for oxidation and biofilm control, but neither removes the need for sound upstream design, solids control, and membrane cleaning discipline.
Nanobubbles also have a role before and after the biological stage. In dissolved air flotation, very fine bubbles attach to flocs, oils, and grease and float them to the surface for skimming, and nanobubbles can improve that attachment through their surface area and surface charge. As a polishing step, a final boost of dissolved oxygen and oxidising capacity before discharge can add margin against effluent limits, although it does not replace the biological removal upstream. In advanced oxidation processes, ozone delivered as nanobubbles transfers more efficiently and stays available longer than ozone from coarse bubbles, which matters against pharmaceuticals, pesticides, and other persistent organics.
Read the wastewater application in detail: /applications/wastewater-treatment.
Agriculture, Fertigation, and Hydroponics
In agriculture, the constraint is often not water volume but what the water carries to the root. Irrigation water low in dissolved oxygen stresses roots, encourages root disease, and leaves fertiliser less available than the label suggests. Bioavailability is the useful word here: a nutrient only helps a plant once it is dissolved in a form the root can actually take up.
Fertigation, delivering dissolved fertiliser through the irrigation system, makes this connection direct. Low oxygen and microbial growth in drip lines clog emitters, while stressed roots take up nutrients poorly even when the dose is correct. Oxygen nanobubbles on the irrigation line can raise dissolved oxygen in the root zone, help keep emitters cleaner by suppressing biofilm growth, and reduce pathogen pressure. Those are three different benefits, and they should be measured separately: root health, emitter clogging rate, and yield are different outcomes, and a trial should not claim all three from a single measurement.
Hydroponics is a sharper version of the same problem. With roots submerged in nutrient solution, dissolved oxygen is the crop's lifeline. Warm solutions hold less oxygen to begin with, and low oxygen invites root rots such as Pythium. Conventional air stones produce relatively coarse bubbles, much of whose oxygen escapes before it dissolves. Nanobubble oxygenation can hold dissolved oxygen at or above saturation throughout the system, supporting healthier white roots and faster growth. The deciding metrics are dissolved oxygen at the far end of the system, root disease incidence, and crop cycle time, all against a control bench running the same cultivar and nutrient recipe.
Read the agriculture application in detail: /applications/agriculture.
Aquaculture and Recirculating Systems
Fish farming leaves very little margin for error. Feed is the largest operating cost, dissolved oxygen is the limiting factor for growth, and a failure in oxygenation can kill an entire stock within hours. That makes aquaculture one of the clearest nanobubble applications, provided the system is specified for the stocking density and feeding rate it will actually see, not for a brochure average.
In a recirculating aquaculture system, the same water is cleaned and reused many times a day, passing through solids removal, a biofilter that converts ammonia to nitrite and then nitrate, carbon dioxide stripping, disinfection, and re-oxygenation. Nanobubble oxygenation helps hold dissolved oxygen stable at high stocking densities, which supports digestion and growth and improves feed conversion ratio, the kilograms of feed needed to produce a kilogram of weight gain. Since feed dominates operating cost, even a small improvement in feed conversion is worth more, in most operations, than a small saving in aeration energy.
Oxygen is only part of the story. Pathogens that shelter inside biofilm are much harder to kill than free-floating organisms, and ozone nanobubbles are used in some systems for disinfection and biofilm control because oxidants carried by nanobubbles can penetrate the film that protects them. Any ozone use in a live fish system, however, must be designed with residual ozone removal and continuous monitoring, because the dose that controls pathogens and the dose that harms stock are not far apart. A responsible supplier will discuss that safety margin openly, in numbers, before installation.
Read the aquaculture application in detail: /applications/aquaculture.
Lakes, Reservoirs, and Ponds
A lake in trouble usually suffers from a cycle, not a single event. Nutrients, mainly nitrogen and phosphorus, feed algal blooms. When the algae die and sink, bacteria consume dissolved oxygen as they decompose them, leaving low-oxygen water near the bottom. Without oxygen, sediment releases stored phosphorus and produces hydrogen sulfide, and that phosphorus feeds the next bloom. This is eutrophication, and it is why a lake can stay degraded long after external nutrient inputs have been reduced: the sediment itself has become a source.
Nanobubble oxygenation works on the part of the cycle that feeds itself. Keeping dissolved oxygen up at the sediment surface can reduce that internal nutrient release, while also helping to oxidise accumulated organic matter. Ozone nanobubbles add an oxidative step for taste-and-odour compounds and some algal metabolites, although they do not remove the nutrients that caused the bloom. A lake project should therefore be judged on sediment oxygen demand, bottom-water dissolved oxygen, phosphorus release, and algal biomass over at least one full season, not on a single week of clear surface water. Oxygenation is a management tool for a eutrophic water body, not a substitute for catchment nutrient control.
Read the lake rejuvenation application in detail: /applications/lake-rejuvenation.
Oil and Gas, Mining, and Industrial Process Water
Produced water, the water that comes up from an oil or gas well along with hydrocarbons, carries dispersed oil, dissolved organics, salts, heavy metals, and residual production chemicals. It must be treated before disposal, reinjection, or reuse, and it is the largest-volume waste stream in the industry. Nanobubbles are applied here for flotation separation of oil and solids and for oxidation of dissolved contaminants, the same surface-area and charge effects that help in municipal wastewater, applied to a much harsher stream. In enhanced oil recovery, gas nanobubbles are also being studied for their effect on interfacial tension and rock wettability at the pore scale, although that work remains largely at laboratory and pilot scale and should be described as such.
Similar reasoning applies to mining and other industrial process waters, where suspended solids, metals, and hydrogen sulfide must be managed under variable flow and chemistry. The engineering questions do not change: what is the oil or solids loading in milligrams per litre, what discharge or reinjection standard must be met, how does the chemistry vary over a shift, and what happens when the system fouls? A pilot on a single, well-behaved sample proves very little. A pilot that runs through normal variation, with fouling and cleaning cycles included, proves a great deal.
In closed cooling water systems, the problem is often the opposite of oxygenation. Dissolved oxygen drives corrosion, and nitrogen nanobubbles can strip dissolved oxygen out of the water without chemical oxygen scavengers. That is a useful reminder that nanobubble technology is a gas-delivery platform, not an oxygen-only product: the gas chosen, oxygen, ozone, nitrogen, or carbon dioxide, should follow the problem, not the other way round.
Read the oil and gas application in detail: /applications/oil-gas.
Pool, Spa, Health, and Wellness Water
In pools and spas, the goal is water that is both safe and pleasant, with as little chemical handling as possible. Ozone nanobubbles support disinfection and oxidation, help break down organic contaminants, and can penetrate biofilm in plumbing where conventional disinfectants struggle to reach. In practice, that usually means lower chlorine demand and clearer water, not the removal of a residual disinfectant altogether. Local health codes still govern disinfection, turnover, and testing in most jurisdictions, and any system should work within those rules, with residual monitoring intact, rather than being presented as a replacement for them.
The same discipline applies to health and wellness water systems more broadly, where water quality, biofilm control, and consistent operation matter more than any single headline claim. The right questions are operational: what is the turnover rate, what is the organic load from bathers, how is biofilm monitored in the pipework, and what does the system do when the ozone generator or pump is offline? A system that depends on perfect uptime for basic safety has not been specified correctly.
Read the pool and spa application in detail: /applications/pool-spa. Read the health and wellness application in detail: /applications/health-wellness.
Carbon Capture and Gas-Liquid Contact
Carbon capture is, at its heart, a gas-liquid contact problem, which is why nanobubbles are being tested there. In amine scrubbing, the most mature capture method, flue gas meets a liquid solvent that chemically binds carbon dioxide, and the solvent is then heated to release a concentrated stream for compression and storage. Heating that solvent takes a great deal of steam, known as the energy penalty, and better gas-liquid contact means better capture per unit of solvent and energy. Carbon dioxide nanobubbles greatly increase the contact area between gas and liquid, which can speed up dissolution and, in mineral routes, the carbonation reactions that lock carbon away as stable carbonate minerals, a form of sequestration.
This is still an emerging application, and it should be presented honestly as one. Capture performance depends on gas composition, temperature, pressure, solvent chemistry, and scale, and a laboratory result on a single gas stream does not translate directly into a plant-wide capture rate. The credible claim is narrower and stronger: nanobubbles improve the contact step, and the contact step is one of the constraints on capture efficiency. Whether that improvement justifies the cost at a given site is a project-specific calculation, not a general promise.
Read the carbon capture application in detail: /applications/carbon-capture.
Fitting a System Into a Real Plant
A nanobubble system is usually delivered as a skid-mounted unit, a complete package of equipment, piping, valves, and controls pre-assembled and tested on a steel frame at the factory and shipped ready for fast installation. That shortens installation, simplifies commissioning, and makes a pilot trial practical, because the same skid that runs a trial can often become the permanent installation. For a plant team, the interfaces are clear: power in, water in, water out, and gas supply, with the rest of the complexity contained inside the package.
Controls are where a good installation becomes a reliable one. A modern skid is typically run from a programmable logic controller with a human-machine interface that shows dissolved oxygen, flow, pressure, run status, and alarms, and lets an operator start, stop, and adjust the system without specialist software. Internet of Things readiness adds remote monitoring of flow, pressure, dissolved oxygen, power use, and alarms, which is especially valuable for unmanned sites, pilot installations, and performance-based contracts. A specifying engineer should ask, in writing, which signals are available, in what format, and how alarms are handled when no one is watching. Gas choice deserves the same attention: oxygen for biological oxygenation, ozone for oxidation and disinfection with its safety and materials requirements, nitrogen for degassing and corrosion control, and carbon dioxide for carbonation and capture work. Any ozone used upstream of a membrane must be fully removed first, because most membranes are damaged by oxidants.
From Pilot to Permanent Installation
The most reliable path from interest to installation is a short, well-measured pilot with a written success criterion agreed before it starts. That criterion should name the parameter, the target, the measurement method, and the period: for example, holding dissolved oxygen above a stated level through the peak load period for four consecutive weeks, or reducing a stated chemical dose by a stated percentage at the same effluent quality. It should also name what happens if the target is not met. Pilots without a written criterion tend to drift into arguments about what was actually promised.
During the pilot, the operations team should keep a simple log a future operator can actually use: dissolved oxygen at injection and at the far end of the process, gas and liquid flow, pressure drop, power use, chemical dose, cleaning events, alarms, and any change in influent load. That log is worth more than a glossy pilot report, because it shows how the system behaved on a bad day, not just on a good one. At the end of the trial, the decision should be made on total cost per unit of result, whether that result is kilograms of oxygen transferred, kilograms of chemical avoided, or compliance margin gained, rather than on equipment price alone. Nanobubble technology will not solve every water problem, and it should not be sold as if it will. What it does well, when specified for the right problem and measured against a proper baseline, is make gas transfer more complete, more stable, and more controllable than conventional bubbles allow. That is a practical advantage, not a miracle, and for the three people who must agree on the same project, a practical advantage stated plainly is exactly what is needed.

TMC Nanobubbles
TMC Nanobubbles is a division of TMC Fluid Systems.
Trusted Engineering. Proven Performance.
At TMC Fluid Systems, we don’t believe in one-size-fits-all. Our team of engineers, scientists, and technical consultants bring together over 500 years of combined experience to design customized, energy-efficient solutions that reduce operating costs and deliver reliable, long-term performance.
Our Capabilities
- Industrial Applications
- Municipal and Industrial Wastewater Treatment
- Airknife Drying & Blow-Off Systems
- Vacuum Boosters and Dry Screw Vacuum Pumps
- Biogas, Natural Gas, and Methane Gas Handling
- Landfill Gas Upgrading & Renewable Natural Gas (RNG)
Advancing Technology, Advancing Results
In recent years, TMC Fluid Systems has expanded to include a team of specialized consultants, system designers, software developers, and application engineers, ensuring that each solution incorporates the latest advancements in fluid dynamics, gas handling, and automation technology.
We are committed to maintaining a flexible and dependable product line backed by exceptional pre- and post-sale support, enabling our systems to perform reliably in the most demanding industrial environments.